Pick up your orders anytime, hassle-free!
Orders placed by 2:00 PM are shipped the same day. Delivered within 24h!
Reliable products, worry-free!
Unused items? No questions asked!
Wireless 802. 11 b /g /n standards
Support for STA / AP two modes of operation
Built-in TCP / IP protocol stack, you can configure a socket
Supports standard TCP / UDP Server and Client
The serial port baud rate support: 1200 / 2400 / 4800 / 9600 / 19200 / 38400 / 57600 / 74800 / 115200 bps
Serial data bits: 5 / 6 / 7 / 8 bits
Serial Parity: None
Serial port stop bits: 1/2 bit
The standard Arduino UNO, Mega pitch
Leads out Arduino Pin 2 / 3 / 4 / 5 / 6 / 7 / 8 / 9 / 10 / 11 / 12 / 13
Leads out ESP8266 GPIO 0 / 2 / 4 / 5 / 9 / 10 / 12 / 13 / 14 / 15 / 16 / ADC / EN / UART TX / UART RX
RESET reset
KEY multiplex configuration function keys
Two DIP switches enable switching Arduino and ESP8266 serial port expansion
WiFi current: continuous transmission: Nearly 70mA (200mA MAX), Standby: < 200uA
Wireless transmission rate: 110-460800bps
The working temperature: -40 Celsius Degree ~ + 125 Celsius Degree
Specific References
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent
Write your review
Review sent
Your review cannot be sent
Reference: ACDEEK_shield-rpi-nfc
Brand: Raspberry Pi
Reference: HMBFZV_sensor_shieldv5
check_circle
check_circle